Nanos cy6j
FAQ:
-“Press coverage” is defensive adjust down.
- If I say “the left LB,” I am referring to the LB on the left side of the screen.
- If I say “shift the defensive line to the right,” I am referring to the right side of
the screen, so move the directional pad to the right, etc.
- To “crash the D-line” move the analog stick, not the D-pad, in the specified
direction.
- Show Blitz is (Y, Triangle) + Left on D-Pad
- Align Coverage is (Y, Triangle) + Right on D-Pad
- How to re-blitz: (A, X) + Down on the right analog stick.
- If you are confused about what player I am referring to, here is a basic outline
for you to use:
1) Nickel 1-5-5 // Cover 2 Sink
1) Press coverage
2) Pinch LB’s
3) Blitz the LB on the left and move him in front of the guard to set a
screen for the MLB blitzing up the gap.
4) Adjust non blitzing DB’s to your own preferable hot route coverage. I
recommend either man up on a WR spread, or set into purple zone.
2) Quarters – Ram Buck 1 (LB Rush Package)
1) Slide the D-line right
2) Crash D-Line right
3) Press coverage
4) Place the blitzing MLB in between the Right Tackle and Right DE
5) Slide the blitzing DB out to the right a little bit.
6) This should cause an overflow and allow the either the DE or DT to put
pressure, while providing decent coverage.
3) 3-4 – Solid - Gap Press.
Credit to PSN: MONEY MADDEN
1) Come out in Quarter D
2) Audible to Gap Press
3) Press Coverage
4) Crash line
5) Bring the ROLB over in the same gap as the blitzing LOLB between the
DT and RE.
6) As soon as the ball is hiked, hold turbo and manually blitz him, sacking
the QB as soon as the center hikes it.
(#4-#9 Can be found in various playbooks, I used Denver to develop them)
4) Quarter Combo – CB Dogs Man or CB Dogs Zone
1) Either play will work, they are essentially the same.
2) This play is great for putting on pressure, but maintaining coverage for
the pass.
3) Show Blitz
4) Spread line
5) Align Coverage
6) Pressure comes from the outside CB’s blitzing.
5) Nickel Strong – Under Smoke
1) Press coverage
2) Pinch Line
3) Move the two ILB between the LDE and LDT
4) This is referred to as an overload blitz
6) Dime Normal – Strong Roll 3
1) Pinch Line
2) Crash line in (RA Down)
3) Press coverage
4) Shuts down the pass while putting pressure from the ends
5) Sometimes the O-line shifts to the outside to adjust for the outside blitz;
in this case a DT comes through unblocked for a sack.
7) Dime Normal – 2 Zone CB Snake
1) Spread line
2) Crash out
3) Show Blitz
4) Manually control the ILB, hot route to QB spy and wait for the gap to
open up the middle
5) As soon as the O-line engages the D-Line and shifts from the outside
pressure, hold turbo and make a straight line towards the QB.
Cool 3-4 Under – Weak Blitz or Strong Blitz (Depending on specific team skill)
(I will set up for the Strong Blitz, if you choose the Weak Blitz, do everything opposite)
1) Shift the line to the right
2) Crash the line to the left
3) Shift the LBs to the right
4) Manually move one blitzing LB between the LDT and LDE, and the other
all the way to the opposite side.
5) He should be lined up to the outside of the Left Offensive Tackle
9) Dollar Normal – Zero Blitz
1) Make sure the LBs do not shift left or right, they need to follow their
blitz between the DT and DE’s
2) Spread line (Optional) Only do this if you’re LBs bump into the DE’s
3) Manually blitz the CB if the line picks up the blitz, if I see a LB slip
through, I like to drop back and play the closest receiver to the inside in
case of a slant route or quick cut.
10) 46 Bear – Safety Fire
1) Re Blitz the middle DT to blitz (Hot route blitz)
2) Move the safety slightly to his right, and on top of his back (They should
be touching)
3) The safety will shoot through untouched.
11) Nickel Strong – Man Strong
1) Show Blitz
2) Shift line left
3) Re Blitz the RE (The one on the left side of the screen)
4) Put the LE in contain, this is optional and is helpful if your opponent
scrambles often. This essentially crunches him in.
12) 46 Bear – Sam Snake
1) Pinch the line
2) Re Blitz left DT (right side of screen)
3) Re Blitz the LB who is already blitzing and move him between the LDT
and LE
4) Press coverage
13) 3-4 – Even Trio Sky
1) Flip play (Play selection screen)
2) Pinch the line
3) Re Blitz the LMLB (The one already blitzing) and move him in between
the RDE and DT
4) Manually blitz the LOLB (Left side of screen) and move him on the
outside of the RDE.
14) Nickel Strong – Cover 2
1) Shift the line to the left.
2) Shift the linebackers to the left.
3) Re Blitz the farthest (left on screen) line backer. It should be diagonal.
4) Re Blitz the right DE and then move the linebacker between him and the
DT.
5) Use the turbo blitz glitch to increase your chances.
1
5) Dime Normal - SS Zone Blitz
1) Pinch the line
2) Move the blitzing safety between the RDE and RDT (Left side on the TV,
so move him across the middle of the field)
3) Re Blitz him and make sure he is slightly behind the two linemen so they
engage first.
4) Move the blitzing DB right next to the outside of the RDE.
16) Dime Normal – Fire Fox Zone
1) Flip the play at the play selection screen.
2) Pinch the line.
3) Re Blitz the RDE on the left side of the screen.
4) Re Blitz the MLB and move him between the RDE and RDT.
5) Move the blitzing DB on the outside hip of the RDE.
17) Dime Normal – Strong Roll 3
1) “LB Pass Rush” package
2) Flip the play at the play selection screen.
3) Shift your D-Line left.
4) Place your RDT in a purple zone.
5) (Optional) Place the outside DBs in yellow zones.
6) Move both blitzing DBs on the outside hip of the DE.
7) I take control of the MLB and either lurk or look for a gap to add
additional pressure.
18) 46 Normal -Inside Blitz
1) Spread Linemen
2) Re Blitz both LBs that are blitzing
3) Move both of them side by side between the two DTs
4) Press Coverage
19) 46 Bear – Wall Slide
1) Flip the play at the play call screen
2) Pinch Line
3) Re Blitz the LE and both of the DTs
4) QB Spy the RE and move him over the center so that they are face to
face.
5) QB Contain the LOLB
Subject: Nano eBook! 
Sat Mar 13, 2010 3:14 pm
